DM6 Gauge & SM AFR2 Sensor Kit Combo, PLX Devices AFR & Data Logging : Flash Tuner

The PLX Air Fuel Ratio Sensor Module accurately measures the precise air fuel ratio (AFR) of any internal combustion engine. Up to 16 Sensor Modules can be daisy chained together from the PLX iMFD line for modular tuning. This Sensor Module can also be used as a stand alone unit capable of interfacing with third party hardware through the analog outputs. The SM-AFR works with gasoline, bio-diesel, ethanol, methanol, E85, LPG, and CNG. Advanced soft start technology prolongs the O2 sensor life.

The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.

Items Included with the SM AFR 2nd Gen

SM-AFR main unit
Bosch LSU 4.2 wideband sensor
O2 sensor harness 10ft
4ft power wire with 2.1mm connector
4ft Analog wires and connector with 4 terminals
1ft Serial Cable
Termination jumper
User Manual

Items Included with the DM-6 Multi-Gauge

DM-6 2 1/16" (52 mm) Gauge
4 Pin connector for SM-AFR connectivity
2 Terminals for 4 pin Connector
3 Wire 8 V. Power Converter
3.5 mm Y Splitter
6" M/F Extension Serial Cable
User Manual

Technical Specs of the 2nd Gen SM AFR Wideband Controller
Physical Dimensions:	2 x 2.875 x 1.125" (52 x 75 x 28mm) L x W x H
Technology:	PLX Critical Response Technology Fast Response PID
Accuracy:	< 0.1AFR (Gasoline) Wideband < 0.2AFR (Gasoline) Narrowband
Measurement Range:	10-20 AFR (Gasoline) 0.68 - 1.36 lambda (Gasoline)
Analog Outputs:	Wideband Linear 0-5V, Narrowband 0-1V (Driving Current 20mA)
Operating Voltage:	9V - 20V
Power Consumption:	20 Watts (Max), 13 Watts (Typical)
Power Supply Technology:	High Efficiency Switching with Soft Start Technology
Operating Temperature:	0 - 85 Deg Celsius
Sensor:	One Bosch LSU 4.2
Enclosure:	Extruded Aluminum

Technical Specs of the DM6 Multi-Gauge with Touch Screen
Physical Dimensions:	Standard 2 1/16 x 0.7" (52 X 18 mm)
Display Technology:	1.10" OLED Screen (124 x 36 pixels) LED (16 Green, Yellow, Red)
Viewing Angle:	180 Degrees
Polarization:	None
Supply Voltage:	3.3V and 8V from SM Module
Power Consumption:	< 1 Watt
Cable Length:	6' Power, 6" Serial
Operating Temp:	0 - 85 Degrees Celsius
Human Interface:	3 Button Capacitive Touch
Number of Sensors:	16 Maximum Daisy Chain
Supported Units:	US Standard, Metric
Items Included with the SM AFR 2nd Gen
SM-AFR main unit Bosch LSU 4.2 wideband sensor O2 sensor harness 10ft 4ft power wire with 2.1mm connector 4ft Analog wires and connector with 4 terminals 1ft Serial Cable Termination jumper User Manual
Items Included with the DM-6 Multi-Gauge
DM-6 2 1/16" (52 mm) Gauge 4 Pin connector for SM-AFR connectivity 2 Terminals for 4 pin Connector 3 Wire 8 V. Power Converter 3.5 mm Y Splitter 6" M/F Extension Serial Cable User Manual

	DM6 Touch Screen Gauge, new from PLX! - $89.99
	DM6 Touch Screen Gauge. AFR & More! 2 1/16" (52mm) Single Color OLED Universal Gauge with 3 Button Touch Screen. The DM-6 Multi Gauge Display Module by PLX Devices is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.
	Gen 2 Air Fuel Ratio Sensor Module with Bosch LSU4.2 Sensor - $134.99
	Gen 2 Air Fuel Ratio Sensor Module with Bosch LSU4.2 Sensor. The PLX Air Fuel Ratio Sensor Module accurately measures the precise air fuel ratio (AFR) of any internal combustion engine. Up to 16 Sensor Modules can be daisy chained together from the PLX iMFD line for modular tuning. This Sensor Module can also be used as a stand alone unit capable of interfacing with third party hardware through the analog outputs. The SM-AFR works with gasoline, bio-diesel, ethanol, methanol, E85, LPG, and CNG. Advanced soft start technology prolongs the O2 sensor life.
	Kiwi 2 Wifi - Turn Your iPhone or iPad into a powerful automotive tool! - $107.99
	Kiwi 2 Wifi is a plug and play automotive tool that connects to the onboard diagnostic port (OBDII / CAN). This tool communicates and retrieves information from your car's computer and wirelessly transmits to any iPhone, iPod Touch and iPad. It is compatible with 1996 and later vehicles and installs in seconds. The Kiwi 2 Wifi can efficiently monitor a vehicle's MPG, data log engine parameters, read/reset engine trouble codes and monitor real time engine performance. Simply connect your device to the Kiwi 2 Wifi through a wifi connection, and launch the compatible app of your choice to obtain vital information about your vehicle.
	Kiwi Bluetooth OBD-II for Android Phones & Mobile Devices - $89.99
	Kiwi Bluetooth is a plug and play wireless device measuring only 2.75 x 1.25 x 0.6 inches. Kiwi Bluetooth comes attached with a 6 ft OBDII cable for easy installation. It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles. Connecting to your Droid mobile devices is as simple as pairing your device with a new Bluetooth connection.