EvoScan Software:  Mitsubishi / Subaru / OBD-II / CAN

Awesome new features:

• Windows 7 32bit and 64bit supported

• Map Tracer for fast tuning and built-in ecu reflashing

• Virtual Dyno feature is now better than ever

• Faster datalogging and other performance improvements

• Displays instantaneous fuel consumption Litres/100km and MPG, (ensure you firstly select Injector Pulse Width + RPM + Speed, + Injector Duty %)

• Displays everyones favorites: Knock Sum, Knock Learn, Fuel Trims, RPM, Speed, Load, AirFlow, Air and Water Temps, Timing, Boost, Oil Pressure, Oil Temp, 0-100kph/0-60mph time, 100-0kph/60-0mph time, Wideband AFR, EGT

• Updated Map Tracer for fast tuning and built-in direct map editing and ecu reflashing. (EvoScan directly looks in the default ecuflash xml rommetadata folder for fuel and ignition tables specific settings for your rom file) Press [ or ] to increase/decrease Fuel or Timing values in the map editor. You can make use of the hotkeys to directly flash the updated rom to the vehicle quickly and with minimal effort

• Virtual dyno feature is now better than ever, with additional smoothing options, and supports a wider range of csv log files. Ensure you have selected your vehicles details in the vehicle settings correctly. If the virtual dyno figures don't match your real dyno figures, you can use the dyno correction factor to set a base line for future virtual road dyno runs

• Now stores logs in "My DocumentsEvoScan v2.7SavedDataLogs" (This is to better support Windows 7 32bit and Windows 7 64bit.)

• Removed single data.xml, now uses seperate DataSettings*.xml files

• EvoX xml settings updated - please use the new EvoX List, try not to copy your full old data.xml file over

• Added a bunch of new Warning Alarm Sound files to choose from

• Map Tracer support added for EvoX and Evo5/6

• Now always remembers the last log folder you used

• Supports 4 different EvoX datalogging modes: MUTIII, CAN OBDII, Mode23, MUTIII SST

• Added EvoX Clear and Read DTC for EFI ecu. This should also work for Ralliart and other CAN based Mitsubishis

• Now Supports Evo7/8/9 AYC Air Bleed and ACD Air Bleed (confirmed with 1.3U cable) select ACD from the dropdown, and use the Actuators window

• Now supports Evo7/8/9 AYC+ACD datalogging (select ACD from the dropdown)

• Free regular updates, with many exciting features to come!

• Log and View your vehicles performance, unlock hidden performance from faulty sensors, and also allow you to successfully see what your car is doing

• High quality and high performance USB2.0 datalogger cable, capable of extreme high speeds

• Its really simple to use, just plug the 16pin end into your car, under your steering wheel, all cars have this plug

• And then plug the USB plug into your home pc, laptop or mobile PDA. And you will instantly have access to all the hidden information inside your car!

• Download / Update EvoScan at this link (registration required)

EvoScan Data Logger instantly displays and records:

• On road dyno graph: Acceleration, torque and hp

• Speed / RPM

• Timing advance

• Fuel trim

• Air flow / Air temperature

• Knock count

• Coolant temperature

• Octane level

• Injector Pulse width

• Oxygen sensor

• Turbo boost

Diagnostic Trouble Code support. - DataLog Active/Stored Fault Codes - Retrieve EFI Fault Codes - Clear EFI Fault Codes

- Includes Custom Gauge builder Wizard.

• Assign data logging item to each gauge.

• Drag, Drop, and Position any number of gauges onto the screen.

• Save/Load your custom Gauge files to share with others.

• View the recorded data on Excel.

• Customizable Led Indicators, Digital Counters, Circular Gauges, Linear Gauges!

- Simultaneous synchronized Wideband serial port meter Logging Support

• Innovate LM-1 Wideband Oxygen Sensor logging support.

• Innovate LC-1 Wideband Oxygen Sensor logging support.

• AEM Uego Wideband Oxygen Sensor logging support.

• Zeitronix Zt-2 Wideband Oxygen Sensor logging support.

• Main EFI ecu data logging items (ABS/AYC/DTC ecu data items to follow).

- Logs Boost PSI/Bar for those replacing the factory MDP sensor with JDM
3bar boost sensors. (only select few vehicles have boost sensor logging)

- Imperial and metric readouts.

- International support for regional settings with different decimal
representation.

- DataLogging speed optimisations - up to 200 data items per second!

- Log data to .csv (Excel) file.  Playback csv data log.

- When loading logs into the graph the log is scanned for acceleration runs, and displays them in a nice list for you to pick from and automatically zooms to that section for you to analyze. It scans the log for positive acceleration for a number of seconds and displays the number of log entries in the list also.

- EvoScan now has MultiByte logging support, which increases accuracy on Load/RPM/AirFlow(MAF)

- DataLogging alarms, you can have an alarm go off if a value goes over or below a specified value, or a combination of criteria for your alarm, (ie. knock count).

- Alerts by Background colour, and/or by custom alarm sound (wav file).

Requirements to use EvoScan Software:

- Either (USB OBDII ECU DataLogger Cable) or (USB OBDII ECU Reprogramming & DataLogging Cable).

- ASP.NET 2.0 software (easy to download and install bulshit software)

- Requires installation of Hardware Cable USB FTDI drivers - Installed with ecuflash, or download from www.ftdichip.com

- Supports All Windows Editions, including Windows 7 32bit and 64bit

EvoScan Software:  Mitsubishi / Subaru / OBD-II / CAN